If you have forgotten what it is like to bathe in comfort, to be in a bath where you can lie back and have a long leisurely soak, then try the Bath Buddy inflatable bath lift.
It`s so easy - by pressing the soft touch button on the hand control you will be gently lowered on a cushion of air down to the very bottom of your bath. You will always be in control; so when you want to re-inflate the Bath Buddy simply press the `up` button and you will be lifted smoothly and gently out of your bath.
All of the Bath Buddy fittings are soft - ensuring your complete comfort. The Bath Buddy bath lift requires no installation and takes just a few minutes to set up and when not in use the Bath Buddy is easily packed away - ready for next time.
Select right or left hand hose bath lift. The hose attaches to the Bath Buddy bath lift seat cushion. For your comfort it can be attached to either side of the bath lift cushion so that you will not feel it during use. As most baths adjoin a wall the hose is best placed on whichever side of the cushion is farthest from the wall. The device attaches securely to the bottom of the bath with four suction pads.
To operate, the user sits on the inflated non-slip air cushion seat in the bath and presses the `down` button on the controls. The device gradually releases air bringing the user gently to the bottom of the bath. The bath lift has a lower back support that helps the user maintain the correct position for reinflation.
The bath lift seat pocket is colour-defined so the user can check their position before re-inflating the bath lift cushion.
Key Features of the Bath Buddy bath lift:
Standard cushion is recommended for bath depths of between 340mm - 415mm (13'' - 16'')
Tall cushion is recommended for bath depths of between 415mm - 490mm (16'' - 19'')
Both standard and tall cushions are suitable for bath widths of 460mm to 560mm (18'' to 22'')
Min width 18'' 460mm, max width 22'' 560mm
PLEASE SELECT SIZE AND HOSE SIDE FROM THE DROP DOWN BOX BELOW
Blower unit dimensions - W - 345mm H - 180mm D - 334mm
Max working load - 127kg
Hose length - 3.7 m
Control lead length 3 m
Weight - Blower unit 4 kg Cushion and hose 1.9kg
Cushion dimensions (tall) W - 570mm H- 380mm D - 590mm
Operating pressure + / - 5% normal to 105mbar maximum to 125 mbar
Motor power rating - 1000w
Class 1 medical device
Due to the nature of this product, we are unable to accept returns if this item has been used. We recommend that you have a dry run on the first use of the lift.